Bathroom Remodel Cost

5×10 Bathroom Remodel Cost – Materials and Labor

Last Updated: 2022-02-16By

The average cost to hire contractor for 5×10 bathroom remodel is $9000 – $12000. This size is considered to be standard and fully equipped bathroom for homes all over North America.

Remodel On Point wants to explain all details of fully renovating bathroom space. Thus we are listing entire spectrum of materials involved in process and trades that charge for their time accordingly.

After reading this article you will be able to understand how much money goes into materials, labor and how much companies are charging on top for management.

5×10 Bathroom Remodel Cost

Low EndMediumHigh End
DIY Project$5 000$8 000$11 000
Subcontractors$8 000$11 000$16 000
Remodel Company$11 000$16 000$21 000
Different quality and type 5×10 bathroom remodel cost projects

Different quality and type 5×10 bathroom remodel cost projects

These numbers are very approximate and companies compete against each other by giving discounts or providing higher end services with exclusive finishing materials.

[instagram-feed]

Full Breakdown of Labor and Material Required

We created full list of materials that may be necessary for renovation of regular size bathroom. In our table you can compare different types of quality material and understand labor costs for installation.

Size/AmountBasicAverageExpensive
Demolition$200$400$600
Lumber and Drywall$750$750$750
Framing Labor$850$850 $850
Duct or Radiator$200$300$500
HVAC Technician $120 $200 $400
Tiles140 sq ft$400$600$1000
Marble Jamb1 -3 Pieces$60$190
Tile Installation$900$1200$1500
Baseboards20 Feet$20$30$50
Vanity1 (36″ – 48″)$500$850$1500
Door with Hardware1$90$180$250
Casings35 Feet$20$30 $50
Carpenter$200$300$400
Faucet1$120$150$200
Showerhead1$100$350$550
Toilet1$160$300$700
Drain Cover1$20$50$250
Plumber$1200$1500$2100
Vanity Lights1$50$150$250
Pot Lights2$20$25$50
Fan1$30$45$70
Electrician$150$250$400
Mirror1$60$100$370
Shower Glass1$450$650$1000
Hardware1 Set$30$50$80
Handyman$100$150$200
Paint1 Gallon$60$80$140
Painter$200$400$600
Deliveries and Extras$1000$1000 $1000
Total$8 000$11 000$16 000
Full list of materials and labor costs for 5×10 bathroom remodel

For line – “Deliveries and Extras” $1000 may seem a lot from first, but once job begins it will be easy to see where money are going. There will be mistakes, extra material to purchase, waste removal and cleaning after almost every stage of work.

Demolition and Disposal

First step of bathroom renovation is always demolition. It does not require any materials to be purchased. Literally anyone can do it, but please stay safe performing dangerous tasks.

Primary expenses during demolition are associated with labor and disposal of material. Home owners that want to save money and do it on their own need just few tools like hammer, crowbar and buckets to carry out debris.

Framing Walls and Redoing Subfloor

This part of bathroom remodel is not always necessary. If house is not that old and the plan is to keep similar layout, you may be just fine gutting to studs and starting from insulation and drywall.

Older exterior and interior wall can be sistered for extra strength. Two pieces of plywood is enough to change subfloor. Professional framer with helper can do this work in 3 – 4 hours.

Drywall and Tape

Do not forget that bathroom has a lot of moisture and it is absolutely necessary to install mold and water resistant drywall. (green or blue boards).

To save money contractors install waterproof drywall only in shower area. Mud and tape process can be speed up by using fans for drying substance. Overall 1 full day is necessary for this step.

Electrical

Amount and cost of electrical work usually depends on quality of existing wiring and amount of extra features needed.

If wires are in great condition and the only think needed is to change lights – this work takes 1 hour and you should not pay more than $100 for it.

Saying that, in many bathroom remodel projects we see new wiring for light, new switch, receptacles and connection for fan.

Plumbing

Let’s assume from beginning that plumbing positions are staying the same or relatively close. We are working only in this room and pipes leading towards bathroom are not to be diverted within other walls or floor joists.

Plumber has 3 spots to work with plus shower drain. Average charge per spot is $550, but it varies as per city and company’s reputation. Only licensed plumber can work on water and drain connections.

Tile and Marble Installation

We know that our bathroom has 140 sq ft of tiles and they can be different in price. What else can affect our tiling scope of work?

Labor cost depends on many factors, but often we see it being either size of actual tile or creative design that home owners prefer. The basic is 12 x 12 or 12 x 24 tiles with stack or brick pattern.

Marble jamb may or may not be needed for edges of shower.

Carpentry and Trim Work

For professional carpenter this size project is a walk in a park. Without second thought one person can finish bathroom carpentry in few hours and make easy $500.

The biggest problem home owners face when testing their skills performing carpentry is professional tools. Carpenters have all types of saws that cut trims in different angles.

Installation of Fixtures & Hardware

Screw driver, Allen key, level and regular drill is all you need for installing hardware with fixtures in bathroom.

If you ever worked in any type of construction or renovation work at one of your life – you will be able to do this with ease.

Expensive Features for Bathroom Remodeling

Luxury projects can go way above budgets that we provide in examples. There is literally no limit to how much you can spend.

The most expensive bathroom reno we have witnessed had price tag to of above $170 000. It shouldn’t be a surprise when you realize toilet alone costs $24 000.

Regular projects with high end upgrades can include heated floor and towel racks, speakers, additional cabinetry, skylight installation, fireplace and many more cool items.

Than a big role plays each fixture and item purchased for finish. $120 / sq ft tiles, vanity with faucet carved from expensive tree, single slab tiles for shower wall.

Reducing 5×10 Bathroom Remodel Cost with Max Quality

Out of all home remodeling projects, bathroom upgrade seems to be less complicated to manage and save money for home owners. It is true if you are handy and have basic tools.

Of course it would be cheaper to do everything on your own, but licensed professionals should always be hired to complete individual tasks like electrical and plumbing.

Mid Quality Bathroom Remodel for $8 900

Trying to maximize quality of work and saving as much as possible, home owners partially do some of the work and for the rest hire trades.

  • Demolition – $400
  • Framing and Drywall – $850
  • Carpentry – $300
  • Painting- $400
  • Handy Work – $150

This already reduces 5×10 bathroom remodel cost and most of people should have no problem completing above listed work.

The rest is buying all materials and hire other trades. If you follow our table with costs and have no critical issues throughout, it will make a huge difference for overall budget.

editor's pick

latest video

news via inbox

Nulla turp dis cursus. Integer liberos  euismod pretium faucibua

Each building has some sort of driveway or at least should have. The main reason is for vehicles to come closer without need to walk all the way. Some homes are residential with small driveway for their car to come in and park before garage or front entrance, and others can be large commercial buildings with loading docks, delivery entrances and casual parking entrances. On Point Remodeling was asked for suggestions on residential driveway for new home construction, and we decided to write detailed article for all our readers. Using this guide you can select the material for your driveway and see what works for your budget. Here are the materials for driveway we will be discussing in our guide:
  • Asphalt
  • Concrete
  • Paver Stone
  • Crushed stone
  • Brick
  • Seashell
  • Gravel
To find good contractor for your driveway, you can either ask our team by email or try to find someone local that worked with neighbors or nearby buildings.

Installation process of any material surface on your driveway

a) Demolition and Excavation – Before anything is done, your contractor will get heavy machinery and scratch off old layer of driveway. They need to go down at least 5-6 inches to insure proper layering before your final layer of material is installed. b) Material Purchase and Delivery – At this point your contract is signed and you already know how the surface will look. Contracting company purchases necessary materials and delivers them to site. Double check if material is correct and not damaged. c) Preparation of Sublevel – Whatever you place as final material, it cannot just be installed directly on top soil. Gravel is the first choice of material that goes down at this stage. Other preferred material is screen sand that can go on top of gravel and works better with stone and bricks. d) Compaction of Ground – To prevent your driveway from moving and changing shapes, all the layers from bottom up have to be properly compacted. Do not leave any spot untouched while doing this or you can get small holes and cracks in driveway after installation. E) Final Installation – This is when all the magic happens. After all preparations and dirty work the final installation is made literally within hours and you can enjoy new driveway. Stone and brick is set up by hand, while other materials require some sort of machinery with manual labor to even out surface.

1. Asphalt

Probably the most used material for road top surfaces as well as driveways is asphalt. This is a mix of gravel and sand that is mixed in and combined by asphalt cement with crude oil. Pros of Asphalt Driveway
  • Very popular and easy to find materials/contractor
  • Completed in 1 day and you can drive on it after
  • Patches and small holes can be fixed fast
Cons of Asphalt Driveway
  • Easy to damage and cracks appear in few years
  • Almost everyone else has same surface
  • Oily surface and chemicals used in mix
Prepared for asphalt driveway will cost you around $5 per square foot to finish. The contractors that take care of entire process from taking out old driveway surface, install subsurface and compact the ground with new asphalt on top, will charge on average $5500 per regular size driveway at single home property.

2. Concrete

What we call concrete is a mixture of Portland cement, aggregate as well as sand with gravel. Suggested thickness of concrete for driveway is 6 inches. The mixture needs to cure without being touched or driven on top for several days. Pros of Concrete Driveway
  • Durable material for large weights
  • Long lifespan if installed properly
  • Winter and summer friendly
Cons of Concrete Driveway
  • Has marks and stains over time
  • Hard to repair without replacement
  • Super hard to DIY
To hire contractors for concrete driveway it will cost around $7-$9 per square foot. This will include site preparation with gravel spread and new concrete installation. They will order full truck of concrete (or several for larger driveways) to pour inside forming. Smoothening and curing is required after installation.

3. Paver Stone

The most luxurious material that you can use to create driveway path with is paver stone. It is made out of natural stone with uneven rough shapes that have different line patterns. Paver stones are very heavy and are perfect for weights on top of them. Almost every city in Europe has roads and walks made out of stone that were installed centuries ago. Pros of Paver Stone Driveway
  • Creative designs can be done
  • Personal looks, can match the house
  • Can replace single stone in minutes
Cons of Paver Stone Driveway
  • Weeds growing through
  • Stone can move over time
  • Most expensive material
There is wide selection of stone that can be purchased for your driveway. On average we recommend settling with $17-$20 per square foot for stone with installation included. Working with this material is very intense labor and we recommend hiring professionals that do this type of work every day.

4. Crushed Stone

Our readers sometimes mistake crushed stone with gravel, but this is not the same material. Crushed stone material is achieved when machine is mechanically crushing larger pieces of unused stone for this specific purpose. It is larger than gravel and can have smooth finish. Crushed stone can also have a mix of colors, which is much pleasant to eyes than gravel. Pros of Crushed Stone Driveway
  • Low maintenance required
  • Fits rural area style
  • Can be reused for other purposes
Cons of Crushed Stone Driveway
  • Gets very hot during summer
  • Can be messy after many drives
  • Hard to remove snow and ice
Buying crushed stone and installing it on your driveway is as easy as it gets. Similar to other rough materials discussed in this post, only small tools like shovels, dolly and buckets are required to spread it on the road. The cost of crushed stone driveway is between $4 and $6 per square foot from professional local contractors that can finish the job in several days.

5. Brick

The same brick we see being used in wall construction can be installed as top driveway surface. Brick is manufactured by compressing clay with plastic mass. It is heated to extreme temperature and dried up to become as solid as you know it. Pros of Brick Driveway
  • Variety of selections in shapes and shades
  • Bricks are recyclable
  • Slip resistant with rough top part
Cons of Brick Driveway
  • Needs regular maintenance
  • Change color over time
  • Old fashion looking
Installing brick on driveway costs $10 per square foot, which is not too far from masonry brick laying as part of the wall. To save money you can use or purchase old brick, that was part of a wall before. Do not mix these two jobs and contact landscaping professionals instead of masonry contractors that work with bricks.

6. Seashell

This material is popular on the coast line where shells can be found near the water. Construction companies use seashells to add in other materials as well as spread them on driveway in rough condition, without adding anything else. It usually comes in white or pearl color and darkens within year because of mixing with sand and dirt. Pros of Seashell Driveway
  • Environmentally friendly
  • Has natural drainage
  • Creates worm vibe of beach house
Cons of Seashell Driveway
  • Break and crack under light weight
  • Sharp and very hard to walk on
  • Gets stuck in shoes and tires
To deliver and spread seashells on driveways costs below $4, which is only slightly more expensive than rough gravel. As you go further from coast line, cost of material increases due to delivery. This material is elegant and very soft. We recommend adding edge lines with darker color landscape material to create visual path.

7. Gravel

This material is used in other construction mixes and underlayment systems. It’s literally fragments and small crushed stones that are put on top of soil. It is easily spread out by hands and anyone can do it. Pros of Gravel Driveway
  • Cheapest of them all
  • Easy DIY Job
  • Can install another material on top
Cons of Gravel Driveway
  • Needs to be graded very often
  • Will mix with dirt and leaves
  • Washes up with heavy rains
It is rough material and can be purchased in bulk (by metric tons or cubic meters). The cost of driveway with gravel should not exceed $3 per square foot, but you can save tons of money by purchasing materials and doings installation by yourself. You do not require specific tools or heavy equipment for the job and delivery of gravel can be arranged directly to your project.

Conclusion

To properly finish any and all of these driveways requires skills and experience. There is no way you can complete any of these projects without heavy equipment and tools that regular home owner’s just store in their garages. Most of those who will read this post will prefer to install asphalt driveway, because of its popularity and low costs. We want to encourage home owners to go for personal preference and what matches your house, rather than getting the most affordable and popular items. Driveway jobs have to be completed fast; otherwise you will need to park elsewhere while the project is running. To not overpay, ask us for quotation sample on material you prefer in specific region where the work need to be done and our team can provide some numbers.

Leave A Comment