Soft Costs in Construction

List of Soft Costs in Construction with Percentage

Last Updated: 2021-08-11By

Construction of a house is divided into two stages. One of them is always discussed and involves physical work and materials purchased for the job. All the expenses under this category are called hard construction costs.

Although we all may or may not understand the process of house build, the stage that is often overlooked and budgeted incorrectly is soft costs.

This is a list of construction soft costs:

  • Architectural Drawings
  • City Permits and Other Fees
  • Construction Reports and Studies
  • Builder and Management Fees
  • Profits, Expenses, marketing
  • Insurance
  • Financing, loans, interest

Many claim that overall soft costs in construction add up to no more than 10% of the job, but our research shows that it is close to 25% – 30% in reality. Home owners or inexperienced builders tend to forget some of the costs and miscalculate the costs.

[instagram-feed]

Follow our guide for construction soft costs and learn how to estimate new home or large renovation projects.

Breakdown of all Soft Construction Costs

Documents and permits

Documents and permits first step in construction

Let’s go a little more in-depth and understand each expense that we call soft cost. Most of these occur before home builder, and only some go throughout the job until the very end. Of course all expense can be higher or lower in different cities. Jobs that are more compels and higher end obviously cost more.

  • Architectural Drawings – Building new house without architectural drawings is not only illegal in construction but also irrational. There are options to save on soft costs by purchasing existing architectural drawings instead of making completely new design. But that would not be custom home anymore.

If you want to go extra step, designers can make 3d rendering of each room for interior. We recommend budgeting 2%-3% of costs to drawings and design.

  • City Permits and Other Fees – There tons of fees and expenses that go to approval authorities. For the most it consists of permit fees, but some regions have additional registration applications that add up as well.

There is no accurate math equation that can relate to every city and state for permit fees. Every place is different, but the costs should not go above 1% of building costs.

  • Construction Reports and Studies – To approve construction of new home, building authorities look at supporting documents. Besides drawings with engineering details construction process depends on things like lot size, positioning of house, dangers to environment, condition of soil.

All construction reports are attached together with architectural drawings and sent to city for approval. They sum up to 1%-2% of overall expenses.

  • Builder and Management Fees – Each builder or general contractor has to be paid. Companies have staff, supervisors and personnel that is paid to build house. Competent project managers work hard on planning new home construction, check quality of work and make sure clients are satisfied with products they get.

From our experience and knowledge we can average our builder fees and management expenses to 7%.

  • Profits, Expenses, marketing – Companies that build homes work and expand with idea of profiting on each project. Builders have ongoing expenses and marketing that has to be covered through jobs they take on for clients. This should not be confused with builder fees. Profiting, expending and covering marketing costs is completely different from salaries.

Generally companies that construct custom homes need 8% to go towards expenses and profits.

  • Insurance – To avoid unpleasant circumstances and disasters during home build that can cause complete shut down, we recommend always getting insurance for work being done and property separately. This expense is not as high as other examples we stated in the list, but most home owners forget about it while budget planning.

Combined insurances should never go above 1% of construction project expenses.

  • Financing, loans & interest – This expense very much depends on financing of the job. We see tendency of financing part of the jobs more often than full projects. Nevertheless borrowing money for home construction and large renovation project is quite costly.

Remodel On Point team advises to assume costs for financing and loans around 5%-7% as construction soft cost percentage.

Difference between hard costs and soft costs in Construction

Hard costs vs soft costs

The main differences of soft costs.

To sum it all up, hard costs in construction cover everything related to physical work or as we say labour with necessary construction materials and finishes for the house. Soft costs in constructions cover indirect expenses to actual building. These are legal fees, management, fees, financing and other expenses for documents required in home construction.

Unlike hard costs and physical work, list of soft costs in construction are less understood by clients or home owners. Unfortunately nowadays to build a house expenses go through the roof due to bylaw requirements. Experienced builder are transparent about budgeting for home constructions from beginning to end.

Additionally we want to underline that builder company fees are just a fraction of overall soft costs, and most of it goes towards architecture, city fees and many other things. Home owners should be more educated on where they spend money during construction.

Construction Soft Cost Percentage Builders Charge

Most home owners are surprised to see soft costs to be so high and ask builders to explain what is included. We wanted to prepare everyone who plans to build new custom home and adequately calculate expenses. One of the biggest mistakes in large construction projects is to underestimate or under budget the job.

Remodel On Point stats show that construction soft cost percentage is on average 27% of the entire project. Always assume to spend more than everyone tells you. Unfortunately this number is quite high. Just think about it for a minute. Budgeting one million dollars for new home construction and spending only $730 000 for labour and materials.

There is a big debate if profits are to be included in construction for companies. The reason for that is many people build houses on their own without hiring builder company. When you build on your own, the soft costs are much lower because there is no profit and overheads are tiny. Ask our team to help you understand more about list of soft costs in construction when working without builder.

editor's pick

latest video

news via inbox

Nulla turp dis cursus. Integer liberos  euismod pretium faucibua

Each building has some sort of driveway or at least should have. The main reason is for vehicles to come closer without need to walk all the way. Some homes are residential with small driveway for their car to come in and park before garage or front entrance, and others can be large commercial buildings with loading docks, delivery entrances and casual parking entrances. On Point Remodeling was asked for suggestions on residential driveway for new home construction, and we decided to write detailed article for all our readers. Using this guide you can select the material for your driveway and see what works for your budget. Here are the materials for driveway we will be discussing in our guide:
  • Asphalt
  • Concrete
  • Paver Stone
  • Crushed stone
  • Brick
  • Seashell
  • Gravel
To find good contractor for your driveway, you can either ask our team by email or try to find someone local that worked with neighbors or nearby buildings.

Installation process of any material surface on your driveway

a) Demolition and Excavation – Before anything is done, your contractor will get heavy machinery and scratch off old layer of driveway. They need to go down at least 5-6 inches to insure proper layering before your final layer of material is installed. b) Material Purchase and Delivery – At this point your contract is signed and you already know how the surface will look. Contracting company purchases necessary materials and delivers them to site. Double check if material is correct and not damaged. c) Preparation of Sublevel – Whatever you place as final material, it cannot just be installed directly on top soil. Gravel is the first choice of material that goes down at this stage. Other preferred material is screen sand that can go on top of gravel and works better with stone and bricks. d) Compaction of Ground – To prevent your driveway from moving and changing shapes, all the layers from bottom up have to be properly compacted. Do not leave any spot untouched while doing this or you can get small holes and cracks in driveway after installation. E) Final Installation – This is when all the magic happens. After all preparations and dirty work the final installation is made literally within hours and you can enjoy new driveway. Stone and brick is set up by hand, while other materials require some sort of machinery with manual labor to even out surface.

1. Asphalt

Probably the most used material for road top surfaces as well as driveways is asphalt. This is a mix of gravel and sand that is mixed in and combined by asphalt cement with crude oil. Pros of Asphalt Driveway
  • Very popular and easy to find materials/contractor
  • Completed in 1 day and you can drive on it after
  • Patches and small holes can be fixed fast
Cons of Asphalt Driveway
  • Easy to damage and cracks appear in few years
  • Almost everyone else has same surface
  • Oily surface and chemicals used in mix
Prepared for asphalt driveway will cost you around $5 per square foot to finish. The contractors that take care of entire process from taking out old driveway surface, install subsurface and compact the ground with new asphalt on top, will charge on average $5500 per regular size driveway at single home property.

2. Concrete

What we call concrete is a mixture of Portland cement, aggregate as well as sand with gravel. Suggested thickness of concrete for driveway is 6 inches. The mixture needs to cure without being touched or driven on top for several days. Pros of Concrete Driveway
  • Durable material for large weights
  • Long lifespan if installed properly
  • Winter and summer friendly
Cons of Concrete Driveway
  • Has marks and stains over time
  • Hard to repair without replacement
  • Super hard to DIY
To hire contractors for concrete driveway it will cost around $7-$9 per square foot. This will include site preparation with gravel spread and new concrete installation. They will order full truck of concrete (or several for larger driveways) to pour inside forming. Smoothening and curing is required after installation.

3. Paver Stone

The most luxurious material that you can use to create driveway path with is paver stone. It is made out of natural stone with uneven rough shapes that have different line patterns. Paver stones are very heavy and are perfect for weights on top of them. Almost every city in Europe has roads and walks made out of stone that were installed centuries ago. Pros of Paver Stone Driveway
  • Creative designs can be done
  • Personal looks, can match the house
  • Can replace single stone in minutes
Cons of Paver Stone Driveway
  • Weeds growing through
  • Stone can move over time
  • Most expensive material
There is wide selection of stone that can be purchased for your driveway. On average we recommend settling with $17-$20 per square foot for stone with installation included. Working with this material is very intense labor and we recommend hiring professionals that do this type of work every day.

4. Crushed Stone

Our readers sometimes mistake crushed stone with gravel, but this is not the same material. Crushed stone material is achieved when machine is mechanically crushing larger pieces of unused stone for this specific purpose. It is larger than gravel and can have smooth finish. Crushed stone can also have a mix of colors, which is much pleasant to eyes than gravel. Pros of Crushed Stone Driveway
  • Low maintenance required
  • Fits rural area style
  • Can be reused for other purposes
Cons of Crushed Stone Driveway
  • Gets very hot during summer
  • Can be messy after many drives
  • Hard to remove snow and ice
Buying crushed stone and installing it on your driveway is as easy as it gets. Similar to other rough materials discussed in this post, only small tools like shovels, dolly and buckets are required to spread it on the road. The cost of crushed stone driveway is between $4 and $6 per square foot from professional local contractors that can finish the job in several days.

5. Brick

The same brick we see being used in wall construction can be installed as top driveway surface. Brick is manufactured by compressing clay with plastic mass. It is heated to extreme temperature and dried up to become as solid as you know it. Pros of Brick Driveway
  • Variety of selections in shapes and shades
  • Bricks are recyclable
  • Slip resistant with rough top part
Cons of Brick Driveway
  • Needs regular maintenance
  • Change color over time
  • Old fashion looking
Installing brick on driveway costs $10 per square foot, which is not too far from masonry brick laying as part of the wall. To save money you can use or purchase old brick, that was part of a wall before. Do not mix these two jobs and contact landscaping professionals instead of masonry contractors that work with bricks.

6. Seashell

This material is popular on the coast line where shells can be found near the water. Construction companies use seashells to add in other materials as well as spread them on driveway in rough condition, without adding anything else. It usually comes in white or pearl color and darkens within year because of mixing with sand and dirt. Pros of Seashell Driveway
  • Environmentally friendly
  • Has natural drainage
  • Creates worm vibe of beach house
Cons of Seashell Driveway
  • Break and crack under light weight
  • Sharp and very hard to walk on
  • Gets stuck in shoes and tires
To deliver and spread seashells on driveways costs below $4, which is only slightly more expensive than rough gravel. As you go further from coast line, cost of material increases due to delivery. This material is elegant and very soft. We recommend adding edge lines with darker color landscape material to create visual path.

7. Gravel

This material is used in other construction mixes and underlayment systems. It’s literally fragments and small crushed stones that are put on top of soil. It is easily spread out by hands and anyone can do it. Pros of Gravel Driveway
  • Cheapest of them all
  • Easy DIY Job
  • Can install another material on top
Cons of Gravel Driveway
  • Needs to be graded very often
  • Will mix with dirt and leaves
  • Washes up with heavy rains
It is rough material and can be purchased in bulk (by metric tons or cubic meters). The cost of driveway with gravel should not exceed $3 per square foot, but you can save tons of money by purchasing materials and doings installation by yourself. You do not require specific tools or heavy equipment for the job and delivery of gravel can be arranged directly to your project.

Conclusion

To properly finish any and all of these driveways requires skills and experience. There is no way you can complete any of these projects without heavy equipment and tools that regular home owner’s just store in their garages. Most of those who will read this post will prefer to install asphalt driveway, because of its popularity and low costs. We want to encourage home owners to go for personal preference and what matches your house, rather than getting the most affordable and popular items. Driveway jobs have to be completed fast; otherwise you will need to park elsewhere while the project is running. To not overpay, ask us for quotation sample on material you prefer in specific region where the work need to be done and our team can provide some numbers.

Leave A Comment